🎉 Limited-time offer: get 10% off your server with code LIMITED10
GameTeam
AI A copilot built into every server

CryoFall Server Hosting

Colonize an alien world and build a civilization with others while the AI copilot keeps the colony alive.

SettingsServer.xml100 players by defaultUDP 6000sub-15ms
99.9%uptime
<15mslatency
25+global locations
72hmoney-back
★★★★★ 4.9 / 5 average rating

What do you need to host a CryoFall server?

To host a CryoFall server you need very little: 2 GB of RAM handles 100+ players by AtomicTorch's own numbers, plus the free CryoFall Dedicated Server (Steam app 1061710), .NET 6, UDP port 6000 open, and your name in server_operators_list in SettingsServer.xml. Or let us host it: GameTeam's CryoFall server hosting is priced per GB of RAM, from $0.49/GB a week, with unlimited slots (the game's players_max_count is the only cap), and the AI copilot changes settings, reads the log and backs up the world when you ask.

2–4 GB RAMup to 100 by defaultSettingsServer.xmlweekly plan
The copilot

Run your CryoFall server by just asking.

CryoFall keeps its server in XML files with every rate commented out, and the console scrolls too fast to type in. Tell the copilot what the colony should be and it edits the files, runs the commands and saves the world before a wipe.

01

Rates Without the # Hunt

Ask for PvP or faster learning points and the copilot edits ServerRates.config and reads it back.

02

Light Game, Light Bill

A 2D world runs on very little RAM — keeping the colony up for months is cheap.

03

Room for the Whole Colony

Unlimited player slots — growth is not a billing event.

04

CryoFall with friends

A top-down survival game on a hostile planet, played out over a whole tech tree — from stone tools to industry and beyond. Communities form settlements, trade, and choose whether to cooperate or compete, and the world reflects every choice.

How much RAM do I need?

CryoFall server RAM requirements

2-4 GB. AtomicTorch's own numbers are 1.5 GB for about 30 players online and 2-2.5 GB for 100-300, so CryoFall is one of the lightest servers you can run.

Your serverStarting RAMFrom (Budget, weekly)
Up to about 30 players2 GB$0.98 / week
30–100 players3 GB$1.47 / week
100+ players, events and lots of bases4 GB$1.96 / week

CryoFall's simulation runs on at most two CPU cores, and memory needs barely move with population: AtomicTorch sizes a 300-player server at 2.5 GB. Extra RAM buys headroom for world saves and mods. Change it in one click from the panel and the colony stays as it is. Player limit: 100 by default (players_max_count in SettingsServer.xml), and AtomicTorch sizes hardware for up to about 300 online.

Setup

How to set up a CryoFall server on GameTeam

01

Pick RAM and a location

2 GB is plenty for most communities. Choose the location closest to your players: we have 25+ across Europe, the Americas and Asia-Pacific.

→
02

Make yourself operator and set the rules

Tell the copilot your in-game name and the rules you want (PvP or PvE, rates, public listing, whitelist), or edit SettingsServer.xml and ServerRates.config in the file manager.

→
03

Invite the colony

With is_public_server set to 1 the server shows in the Community servers list. Private servers are added under Custom servers with the address from the panel.

Good to know before you start

Start the server once to generate SettingsServer.xml, then put your in-game name in server_operators_list. Without it you cannot use the server console from the game or edit the server description.

The most common problem

Saves don't carry across major game versions, so back up the Data folder before every update.

SettingsServer.xml + ServerRates.config

CryoFall server settings explained

Server settings live in Data/SettingsServer.xml, created the first time the server runs, with an XML comment above every value. Gameplay rates and PvP sit separately in Data/ServerRates.config, where every rate starts commented out with #. Operators can also edit the rates, description and welcome message from the game. The values owners change most:

SettingWhat it does
nameServer name in the list. Keep it short: 64 characters at most.
is_public_server1 adds the server to the Community servers list; 0 keeps it private.
players_max_countMost players online at once. Default 100.
server_operators_listComma-separated in-game names with admin rights. Add yourself before anything else.
server_moderators_listPlayers who can kick, mute and manage the whitelist without full admin rights.
access_whitelist_enabled1 lets only whitelisted players in. Manage the list with the /mod.whiteList commands.
no_client_mods1 disables client-side mods for everyone. Recommended for PvP.
autosave_interval / save_backups_countMinutes between saves (default 60) and how many backup copies to keep (default 25, from 3 to 100).
portGame port, UDP 6000 by default.
description / welcome_messageBrowser description (600 characters) and the message shown on login (4,096). Easiest to edit from the game's Current Game menu.
PvP (ServerRates.config)Set to 1 and remove the # at the start of the line to make it a PvP server.
Admin

CryoFall server commands

Open the console with ~ in game and start each command with /. Tab autocompletes. You need to be an operator (or a moderator for the /mod commands). The copilot can run these from the panel too.

CommandWhat it does
/opAdd <name>Makes a player a server operator. /moderatorAdd adds a moderator.
/kick <name> <minutes> "reason"Kicks a player and blocks them for that many minutes.
/ban <name>Adds a player to the blacklist. /mod.blackList.remove lifts it.
/mod.whiteList.add <name>Adds a player to the whitelist; switch it on with /mod.whiteList.enabled 1.
/mute <name> <minutes>Stops a player chatting for a while.
/admin.notifyAll "message"Sends a notice to everyone online. Keep the text in quotes.
/admin.setRaidingWindow <UTC> <hour> <length>Limits raiding on a PvP server to a daily window.
/startEvent <event>Starts a world event. /admin.finishEvents ends them all.
/help <search>Lists the console commands, filtered by what you type.
stop <seconds> <message>Server console only: saves and shuts down after a countdown so players can get somewhere safe.

Can I add mods to a CryoFall server?

Yes. The server keeps its mod list in ModsConfig.xml, which it creates on first start. Set no_client_mods to 1 in SettingsServer.xml if you want to block client-side mods, which AtomicTorch recommends for PvP.

Back up Data before adding or removing mods. If the server stops loading after a change, ask the copilot: it reads the server log and tells you which entry in ModsConfig.xml to blame.

CryoFall server ports

6000 · UDPGame port: players connect here (default)

Nothing to forward on GameTeam: the panel shows your server's exact address and port, which can differ from the default.

Simple pricing

Pay per GB of RAM. Never per slot.

You pay for memory, not seats, and the weekly plan lets you start with a single week. Change RAM in one click, or switch the same server to another game. The AI copilot is included on every plan.

2 GB · Up to about 30 players3 GB · 30–100 players4 GB · 100+ players, events and lots of bases
deploy --game cryofall
Budget · pay per GB
$0.49/ GB · week
+ applicable tax, shown at checkout
or $1.99/GB billed monthly · cheaper on longer terms
  • ✓ AI copilot included on every plan
  • ✓ Unlimited player slots — we never charge per slot
  • ✓ Ryzen 9 7950X · NVMe storage
  • ✓ DDoS protection included
  • ✓ Switch to another game anytime
  • ✓ 25 GB NVMe storage · 160 Gbps DDoS protection
Deploy your CryoFall server
First 72 hours money-back.
deploy --game cryofall --premium
Premium · pay per GB
Most popular
$0.74/ GB · week
+ applicable tax, shown at checkout
or $2.99/GB billed monthly · cheaper on longer terms
  • ✓ AI copilot included on every plan
  • ✓ Unlimited player slots — we never charge per slot
  • ✓ Ryzen 9 7950X · Unlimited NVMe storage
  • ✓ 480 Gbps DDoS protection
  • ✓ Switch to another game anytime
  • ✓ Dedicated threads
  • ✓ Automatic backups
  • ✓ Priority support
Deploy your CryoFall server
First 72 hours money-back.

Hardware & network

CPURyzen 9 7950X
StorageNVMe RAID
NetworkDDoS protection included
Latencysub-15ms · 25+ locations
Uptime99.9%

Locations

Europe
GermanyFranceNetherlandsEnglandTurkey
Americas
USACanada
Asia-Pacific
SingaporeIndia
Rated 4.9 / 5 by players

What server owners say

★★★★★

"Honestly didn't expect much from an 'AI manager', but it's how I run my server now. I'll type something like 'why did the server crash last night' and it actually reads the logs and tells me."

Kenneth M.
Verified review
★★★★★

"I'd been on two other hosts before this. What sold me was the AI manager catching a memory leak in one of my mods and naming the exact one — something I'd been chasing for weeks."

Clinton S.
Verified review
★★★★★

"I'm not very technical and setting up servers always stressed me out. Now I just ask the assistant to fix a config, and it either walks me through it or does it for me."

Maritta W.
Verified review
Answers, fast

CryoFall server hosting FAQ

How much RAM does a CryoFall server need?

2–4 GB. AtomicTorch puts 30 players online at 1.5 GB and 300 at 2.5 GB, so 2 GB is a real starting point, not a squeeze. Go to 3–4 GB for mods or a very busy world. The game uses at most two CPU cores, so faster cores help more than extra ones.

How many players can join a CryoFall server?

players_max_count in SettingsServer.xml is 100 by default, and you can raise it: AtomicTorch sizes hardware for up to about 300 online. We never charge per slot, so the setting is the only limit.

How do I become an admin on my CryoFall server?

Add your in-game name (the one in the bottom right of the main menu) to server_operators_list in SettingsServer.xml and restart, or ask the copilot. Then press ~ in game to use the operator commands, and add more admins with /opAdd.

How do I turn on PvP?

Open Data/ServerRates.config, find the PvP line, change 0 to 1 and delete the # in front of it, then restart. Operators can also edit rates from the ESC menu in game. PvP servers get S.H.I.E.L.D. base protection by default, and /admin.setRaidingWindow can limit raids to set hours.

How do I join a private CryoFall server?

Public servers appear in the Community servers list. A private one is added under Custom servers in the CryoFall menu: paste the address from the GameTeam panel and connect.

How do I wipe the world for a new season?

Stop the server and start it with a new world (the new option on the self-hosted server). On GameTeam, ask the copilot: it backs up the current save first, so a wipe never has to be permanent.

Will my world survive a CryoFall update?

Usually, but AtomicTorch doesn't migrate saves between major game versions, so always back up the Data folder first. On GameTeam, stop and start the server to update it, and ask the copilot for a backup before you do.

Can I host a CryoFall server myself?

Yes. The CryoFall Dedicated Server is a free Steam tool (or SteamCMD app 1061710) that runs on Windows, Linux or Mac with .NET 6. You need a machine that stays on and UDP 6000 forwarded on your router. Renting saves you the always-on PC and the port forwarding.

How much does it cost to rent a CryoFall server?

A CryoFall server rental is billed per GB of RAM: $0.49/GB a week on Budget, or $1.99/GB billed monthly. 2 GB is $0.98 a week and 4 GB is $1.96 a week, with unlimited slots and the AI copilot included. The first 72 hours are money-back.

Your colony, still standing when you log back in.

Deploy the server, tell the copilot your rules, and post the address to your community.

Deploy your CryoFall server